Bones Ceramic Super REDS™

The story of Ceramic Super REDS™ is simple. Take the superior steels used in our Super REDS™ and swap the steel balls for grade 5, silicone nitrade, hot isostatically pressed ceramic balls and you have Bones Ceramic Super REDS™.

Bones Ceramic Super REDS™ are lighter and provide faster acceleration because the balls weigh much less. They create less friction and are thus faster than Super REDS™, with or without lubricant! When you get dirt into your Ceramic Super REDS™, the ceramic balls will help to re-polish the steel races flat again, providing a self-healing benefit because ceramic balls are so much harder than steel. Finally, ceramic balls will not rust, further lengthening their life. Ceramic Super REDS™ use a bone colored shield with laser-engraved outer races for identification.

Features

• Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
• Higher quality steel races and a superior surface finish.
• Single non-contact removable rubber shield for easy cleaning and less friction.
• High speed nylon ball retainer for greater strength and speed.
• Pre-lubricated with Speed Cream™ racing lubricant.
• Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
• 8mm x 22mm x 7mm

Contents

• Set of 8 bearings
• Instructions
• Sticker

General Information

Bones Bearings are not ABEC rated. Bones bearings are skate rated bearings and are engineered to higher standards than ABEC. Click here to learn more about ABEC vs Skate Rated (Bones Bearings)

Trikke Use

These are great bearings for the Trikke 8-1/2" (human powered) or 9-1/2" (rear Pon-E wheels), or any size of the polyurethane wheels. They DO NOT work on the T12 Roadster.

Bones Super Swiss 6

This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, faster acceleration, greater strength and durability.

Features

• Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
• High speed nylon ball retainer for greater strength and speed.
• Pre-lubricated with Speed Cream™ racing lubricant.
• Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Contents

• Set of 8 bearings
• 4 bearing spacers
• Instructions
• Sticker

General Information

Bones Bearings are not ABEC rated. Bones bearings are skate rated bearings and are engineered to higher standards than ABEC. Click here to learn more about ABEC vs Skate Rated (Bones Bearings)

Trikke Use

These are great bearings for the Trikke 8-1/2" (human powered) or 9-1/2" (rear Pon-E wheels), or any size of the polyurethane wheels. They DO NOT work on the T12 Roadster.

Speed Cream™ Lubricant

Bones Speed Cream™ is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon® based lubricants in skate environments. Speed Cream™ makes your bearings faster and is very long lasting.

Contents

Sticker and instructions

• Trikke Replacement Bearings - Brand New

• Fits T12 Roadster Only

• 6000-2RS  -  10mm x 26mm x 8mm

• Each bearing has a Rubber seal on both sides for maximum protection from contamination

• Sold in Sets of 2

• Trikke Replacement Bearings - Brand New

• Fits T12 Roadster Only

• 6000zz  -  10mm x 26mm x 8mm

• Each bearing is sealed to prevent contamination

• Sold in Sets of 2

• Trikke Replacement Bearings - Brand New

• Fits T8v1, T8v2, T8C, T7 Coupe, T78CS, T67, T6 & T5

• High Speed ABEC 7  -  8mm x 22mm x 7mm

• Each bearing is sealed with Red rubber seals to prevent contamination

• Sold in Sets of 2